Vous avez des questions ?

Light series ball slewing bearings

Discover all Rollix light series ball slewing rings ranges

Accueil
>
Our products
>
Slewing ring
>
Light series ball slewing bearings

Light series ball slewing rings ranges

These slewing rings are not recommended for hanging loads. Vertical use must be limited due to clearance. These ball slewing bearings are also available without drilled holes, with identical part numbers, but differentiated by the last two characters:

00: without fastening holes
01: standard drilling

L-shaped profile slewing rings have rough surfaces except for the mounting surfaces.

Why choose light series ball slewing rings?

L-shaped light series slewing rings can be used for all low-load applications, without vibration or the need for precision.

Light series slewing rings with square sections have a slightly higher load capacity.

There are 3 different gear run-outs levels for each family (standard, low, very low).

Rollix light series ball slewing rings ranges

L-shaped with external gear

Material: XC45
Average diameters: from Ø411 to Ø1091 mm
Maximal speed (RPM x average diameter): 40 000 ND_M
Depending on the precision required, these slewing rings are available with 3 levels of run-outs: standard, low, very low
Gear: unhardened

L-shaped with internal gear

Material: XC45
Average diameters: from Ø411 to Ø1091 mm
Maximal speed (RPM x average diameter): 40 000 ND_M
Depending on the precision required, these slewing rings are available with 3 levels of run-outs: standard, low, very low
Gear: unhardened

L-shaped without gear

Material: XC45
Average diameters: from Ø411 to Ø1091 mm
Maximal speed (RPM x average diameter): 40 000 ND_M
Depending on the precision required, these slewing rings are available with 3 levels of run-outs: standard, low, very low
Gear: unhardened

Slewing ring with square sections with external gear

Material: XC45
Average diameters: from Ø411 to Ø1091 mm
Maximal speed (RPM x average diameter): 50 000 ND_M
Depending on the precision required, these slewing rings are available with 3 levels of run-outs: standard, low, very low
Gear: unhardened

Slewing ring with square sections with internal gear

Material: XC45
Average diameters: from Ø411 to Ø1091 mm
Maximal speed (RPM x average diameter): 50 000 ND_M
Depending on the precision required, these slewing rings are available with 3 levels of run-outs: standard, low, very low
Gear: unhardened

Slewing ring with square sections without gear

Material: XC45
Average diameters: from Ø411 to Ø1091 mm
Maximal speed (RPM x average diameter): 50 000 ND_M
Depending on the precision required, these slewing rings are available with 3 levels of run-outs: standard, low, very low
Gear: unhardened